- Bandpass filter for sulfur or phosphorous ( 1 per FPD )
- Use the Dual FPD for simultaneous sulfur and phosphorous detection
- Detects sulfur compounds down to 200ppb, and phosphorous compounds down to 10ppb
The FPD is similar in design to the FID, except that the detector body is light-tight and a second flow of hydrogen purges the optical path between the photomultiplier tube (PMT) and the hydrogen-rich flame. A bandpass filter (at 393 nm for sulfur and 525 nm for phosphorus) mounts in front of the PMT, so only that the emissions from sulfur or phosphorus are detected while other wavelengths are rejected.
The dual FPD detector is equipped with two PMTs and filters for the simultaneous detection of sulfur and phosphorus.
Both the single or dual FPD can be equipped with an FID collector electrode and electrometer, which will detect the hydrocarbon peaks at the same time the PMTs are responding to the sulfur and phosphorus compounds. The FID response is not as sensitive as a pure FID because the hydrogen-rich flame is optimized for sulfur and phosphorus detection, rather than hydrocarbon detection. Users can easily optimize the sulfur-phosphorus response versus hydrocarbons response simply by adjusting the hydrogen/air mixture with the included EPC gas controls.
(Prices as of January 1, 2022. PRICES ARE SUBJECT TO CHANGE. CONSULT MOST RECENT PRICELIST.)
8690-0080 FPD detector (includes either S or P filter, specify at time of order) $ 5,069.00
8690-0085 Dual FPD with sulfur and phosphorus filters $ 10,127.00
8690-2085 Dual FPD with sulfur and phosphorus filters, and FID collector electrode $ 11,396.00